Månatliga arkiv: mars 2014

My first ordered Pcbs has arrived

Here is the pcbs i ordered on march 7th. It took 18 days. That is not so bad. And the result look fantastic. Now i will solder one of the three i recived.
Publicerat i Attiny, Communication, Development, DIY, PCB | Stängt för kommentarer

My new uv-box

I have been used a big lamp standing on a not so good construction a couple of years now. Well it works, but do not look fancy. I have made a lot of PCB:s with that lamp. But now i have waited long enough. After i have bought the uv-leds on strip from ebay, paying about […]
Publicerat i Components, Development, DIY, Okategoriserade, PCB, Picaxe, Projects | Stängt för kommentarer

I2c and the Raspberry Pi

Now i have succeded with communication between the Pi and the Attinys as I2C slaves. Here is the result: For live demo go to this page URL:http://mrslade.dyndns.org:8083/test.PHP
Publicerat i Attiny, Communication, Home automation, Programming, Projects, Raspberry Pi | Stängt för kommentarer

My first Standalone Arduino

I made a temperature logger  a long time ago. It was build on my very first Arduino Uno board. I got three of them now. The thing is, that it just running and nothing have changed with the source code since almost the first day i made it. So i decided to fix it as […]
Publicerat i Arduino, Communication, Home automation, Projects | Stängt för kommentarer

My own AVR programmer shield

After made my own programmer with my Arduino Uno as a ISP and a breadbord with a couple of wires, i made something good yesterday. I made one on a  experiment circuit board. With the possibility to program both Atmega168/328 and Attiny 13/25/45/85. Well, it’s not looking so fancy, but it works, and isn’t that […]
Publicerat i Arduino, Attiny, Programming | Stängt för kommentarer

Nothing is impossible or how i uploaded a sketch to my Atmega328-PU (non-P version)

I tried a while to upload the sketch blink to my Atmega328-PU without success. I checked internet for solutions and trust me, i have tested them all. But no success, until i found this one. It’s not as simple like to use the Arduino IDE but it works with sketches made in the Arduino IDE, […]
Publicerat i Arduino, Communication, Okategoriserade, Programming | Taggat | Stängt för kommentarer

I2C on a Attiny85 / Attiny45 / Attiny25

I have made it. Finally i get it to work. I communicate with an attiny85 (will work with 45/25 too i think CONFIRMED!). The SSR i had to my previous lab with an Arduino as a “webserver” that was also controlling my SSR with a simple toogle button has now become a single Attiny85 controlled […]
Publicerat i Attiny, Communication | Taggat , , , | Stängt för kommentarer

Measure my electricity consumption

One part of the HAS (Home Automation System) is to measure my electric consumption. To do this i have to read an light pulse from my unit. So i made one simple reader with photo resistor and a single resistor on 1kΩ connected to my Arduino. Well, it was not so successful because the fast […]
Publicerat i Arduino, Home automation, Okategoriserade, Projects | Stängt för kommentarer

Show the people my world!

I have build a simple webserver with webcam so i can show you all when changes is made on my last project with home automation. Its a pretty simple build with the Raspberry Pi and a QuickCam® for Notebooks Pro. All together its simple task is to take one picture every 2 seconds and act as a […]
Publicerat i Other, Raspberry Pi | Stängt för kommentarer

Let’s start this page up now

Below is my projekt based on Arduino. It’s ment to be a predevelopment for my house automation, where i will be able to turn lights on/off as a timer, but with the smart idea of connecting a phototransistor so that the lights wont turn on until its enough dark outside. All will be a internal […]
Publicerat i Arduino, Home automation, Projects | Taggat , , | Stängt för kommentarer