Författararkiv:Martin

Laser Engraver

For a couple of weeks ago my father received a NEJE 500mW laser engraver he ordered from internet. I will say that it is a good quality piece except from one thing. My father put it together, but he wanted me to set it up and make it run correct. It started well.. Of course […]
Publicerat i Arduino, DIY, Electronics, Laser Engraver, Okategoriserade, PCB | Stängt för kommentarer

My first ordered Pcbs has arrived

Here is the pcbs i ordered on march 7th. It took 18 days. That is not so bad. And the result look fantastic. Now i will solder one of the three i recived.
Publicerat i Attiny, Communication, Development, DIY, PCB | Stängt för kommentarer

My new uv-box

I have been used a big lamp standing on a not so good construction a couple of years now. Well it works, but do not look fancy. I have made a lot of PCB:s with that lamp. But now i have waited long enough. After i have bought the uv-leds on strip from ebay, paying about […]
Publicerat i Components, Development, DIY, Okategoriserade, PCB, Picaxe, Projects | Stängt för kommentarer

I2C on a Attiny85 / Attiny45 / Attiny25

I have made it. Finally i get it to work. I communicate with an attiny85 (will work with 45/25 too i think CONFIRMED!). The SSR i had to my previous lab with an Arduino as a “webserver” that was also controlling my SSR with a simple toogle button has now become a single Attiny85 controlled […]
Publicerat i Attiny, Communication | Taggat , , , | Stängt för kommentarer

Measure my electricity consumption

One part of the HAS (Home Automation System) is to measure my electric consumption. To do this i have to read an light pulse from my unit. So i made one simple reader with photo resistor and a single resistor on 1kΩ connected to my Arduino. Well, it was not so successful because the fast […]
Publicerat i Arduino, Home automation, Okategoriserade, Projects | Stängt för kommentarer

Show the people my world!

I have build a simple webserver with webcam so i can show you all when changes is made on my last project with home automation. Its a pretty simple build with the Raspberry Pi and a QuickCam® for Notebooks Pro. All together its simple task is to take one picture every 2 seconds and act as a […]
Publicerat i Other, Raspberry Pi | Stängt för kommentarer

Let’s start this page up now

Below is my projekt based on Arduino. It’s ment to be a predevelopment for my house automation, where i will be able to turn lights on/off as a timer, but with the smart idea of connecting a phototransistor so that the lights wont turn on until its enough dark outside. All will be a internal […]
Publicerat i Arduino, Home automation, Projects | Taggat , , | Stängt för kommentarer