Kategori-arkiv: Arduino

Laser Engraver

For a couple of weeks ago my father received a NEJE 500mW laser engraver he ordered from internet. I will say that it is a good quality piece except from one thing. My father put it together, but he wanted me to set it up and make it run correct. It started well.. Of course […]
Också publicerat iDIY, Electronics, Laser Engraver, Okategoriserade, PCB | Stängt för kommentarer

The 3D printer breaktrough continue

Here you can see how it slowly got from just a blob to the done piece. Well its a lot of adjustment left but we are on the right lane for now.
Också publicerat i3D Printer, DIY | Stängt för kommentarer

The 3D printer breaktrough

Hello world. Today something wonderful has happend. Our first print object was perfect generated after some modifications on the extruder pipe. Also added a fan on the middle on the extruder pipe. I will upload some images tomorrow. When we should have writed our next object we got problem and everything got jammed. So we […]
Också publicerat i3D Printer, Development, DIY, Projects | Stängt för kommentarer

Now things have happends

Hello everyone! Long time, no see! Now we have come to almost the end of the 3D printer project. We have had some problems on the way. The Mega boards “volt regulator” got burned so i had to make some modifications to my Ramps 1.4 board and give it 5v from my power supply. It […]
Också publicerat i3D Printer, Development, DIY, Electronics, Okategoriserade | Stängt för kommentarer

My first Standalone Arduino

I made a temperature logger  a long time ago. It was build on my very first Arduino Uno board. I got three of them now. The thing is, that it just running and nothing have changed with the source code since almost the first day i made it. So i decided to fix it as […]
Också publicerat iCommunication, Home automation, Projects | Stängt för kommentarer

My own AVR programmer shield

After made my own programmer with my Arduino Uno as a ISP and a breadbord with a couple of wires, i made something good yesterday. I made one on a  experiment circuit board. With the possibility to program both Atmega168/328 and Attiny 13/25/45/85. Well, it’s not looking so fancy, but it works, and isn’t that […]
Också publicerat iAttiny, Programming | Stängt för kommentarer

Nothing is impossible or how i uploaded a sketch to my Atmega328-PU (non-P version)

I tried a while to upload the sketch blink to my Atmega328-PU without success. I checked internet for solutions and trust me, i have tested them all. But no success, until i found this one. It’s not as simple like to use the Arduino IDE but it works with sketches made in the Arduino IDE, […]
Också publicerat iCommunication, Okategoriserade, Programming | Taggat | Stängt för kommentarer

Measure my electricity consumption

One part of the HAS (Home Automation System) is to measure my electric consumption. To do this i have to read an light pulse from my unit. So i made one simple reader with photo resistor and a single resistor on 1kΩ connected to my Arduino. Well, it was not so successful because the fast […]
Också publicerat iHome automation, Okategoriserade, Projects | Stängt för kommentarer

Let’s start this page up now

Below is my projekt based on Arduino. It’s ment to be a predevelopment for my house automation, where i will be able to turn lights on/off as a timer, but with the smart idea of connecting a phototransistor so that the lights wont turn on until its enough dark outside. All will be a internal […]
Också publicerat iHome automation, Projects | Taggat , , | Stängt för kommentarer